Composite Operator Level II v22
All Shifts Available
Under general supervision, the Composite Operator Level II independently performs a range of composite manufacturing operations required to fabricate, assemble, and process composite parts and assemblies for the V 22 Bell program. The Level II operator is proficient in multiple composite processes, works from detailed engineering documentation, ensures compliance with Bell and aerospace quality standards, and provides technical support and guidance to Level I operators.
Key Responsibilities
Composite Manufacturing & Assembly:
" Independently perform composite layup, wrap, bonding, trimming, drilling, and assembly operations for V 22 composite parts and subassemblies
" Execute ply placement, orientation, sequencing, and consolidation per engineering drawings, ply books, and work instructions
" Perform vacuum bagging, debulking, leak checks, and preparation of composite components for curing
" Join, assemble, and integrate composite structures and detail parts in accordance with program and process specifications
" Identify and correct common composite defects such as wrinkles, bridging, ply misalignment, or contamination
Material Preparation & Process Control:
" Prepare composite materials including thawing, cutting, kitting, staging, and out time control
" Properly handle prepreg, dry fiber, resins, adhesives, sealants, and consumables to ensure material integrity
" Apply release agents, peel ply, breather, bleeder, films, and tapes per approved processes
" Ensure material identification, labeling, and traceability in compliance with Bell V 22 program requirements
Quality & Documentation:
" Work independently from engineering drawings, specifications, work instructions, and routers
" Perform self-inspection of work to verify compliance with quality, dimensional, and visual standards
" Accurately complete production documentation, inspection records, and electronic systems
" Identify, document, and communicate non conformances, defects, or process deviations
" Support Quality and Engineering during inspections, investigations, and corrective actions
Training, Mentorship & Continuous Improvement:
" Provide technical guidance and on the job training to Level I Composite Operators
" Support onboarding, cross training, and skill development initiatives
" Participate in continuous improvement, lean manufacturing, and process optimization activities
" Assist with prototype builds, rework, and development efforts as required
Safety, Environmental & Housekeeping:
" Comply with all Environmental, Health & Safety (EHS) requirements and Bell program safety standards
" Properly use personal protective equipment (PPE), including respirators and protective clothing
" Maintain a clean, organized, and FOD free work area
" Properly segregate and dispose of composite waste, chemicals, and consumables per company and regulatory requirements
Position Requirements
Education, Training & Experience:
" High School Diploma or GED required
" Two (2) to five (5) years of experience in composite manufacturing or aerospace assembly
" Demonstrated experience performing composite layup, wrap, bond, or trim operations with minimal supervision
" Experience working in a regulated aerospace or defense manufacturing environment preferred
Skills & Abilities:
" Proficient understanding of composite materials and manufacturing processes
" Ability to read and interpret engineering drawings, ply books, and work instructions
" Strong attention to detail and quality ownership
" Good manual dexterity and hand eye coordination
" Ability to troubleshoot basic process and quality issues
" Effective communication skills and ability to mentor less experienced operators
" Ability to work independently while supporting team objectives
Physical & Work Environment Requirements:
" Ability to stand, bend, kneel, reach, and perform repetitive motions for extended periods
" Ability to lift and carry materials up to 35 50 lbs.
" Manufacturing environment with exposure to composite materials, resins, solvents, and machinery
" PPE required including gloves, safety glasses, respirators, and protective clothing
Confined Space & Limited Access Work Requirements:
" Ability to safely perform work in confined or restricted spaces including aircraft structures, subassemblies, tooling, and enclosed composite components
" Perform composite layup, bonding, trimming, inspection, or assembly tasks while working in limited access areas that may restrict movement, visibility, or positioning
" Ability to work in awkward positions for extended periods, including kneeling, crouching, bending, reaching, or working overhead
" Comply with all confined space awareness entry required training, safety procedures, and signage requirements as defined by site EHS and program standards
" Ability to maintain situational awareness and follow communication protocols while working in enclosed or restricted environments
" Properly use required personal protective equipment (PPE), ventilation equipment, and monitoring devices when working in confined or limited access spaces
" Immediately report unsafe conditions, physical discomfort, or hazards encountered while working in confined spaces to supervision
Equal Opportunity Statement
Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, age, color, religion, sex, national origin, disability, veteran status, or any other characteristic protected by law.
Under general supervision, the Composite Operator Level II independently performs a range of composite manufacturing operations required to fabricate, assemble, and process composite parts and assemblies for the V 22 Bell program. The Level II operator is proficient in multiple composite processes, works from detailed engineering documentation, ensures compliance with Bell and aerospace quality standards, and provides technical support and guidance to Level I operators.
Key Responsibilities
Composite Manufacturing & Assembly:
" Independently perform composite layup, wrap, bonding, trimming, drilling, and assembly operations for V 22 composite parts and subassemblies
" Execute ply placement, orientation, sequencing, and consolidation per engineering drawings, ply books, and work instructions
" Perform vacuum bagging, debulking, leak checks, and preparation of composite components for curing
" Join, assemble, and integrate composite structures and detail parts in accordance with program and process specifications
" Identify and correct common composite defects such as wrinkles, bridging, ply misalignment, or contamination
Material Preparation & Process Control:
" Prepare composite materials including thawing, cutting, kitting, staging, and out time control
" Properly handle prepreg, dry fiber, resins, adhesives, sealants, and consumables to ensure material integrity
" Apply release agents, peel ply, breather, bleeder, films, and tapes per approved processes
" Ensure material identification, labeling, and traceability in compliance with Bell V 22 program requirements
Quality & Documentation:
" Work independently from engineering drawings, specifications, work instructions, and routers
" Perform self-inspection of work to verify compliance with quality, dimensional, and visual standards
" Accurately complete production documentation, inspection records, and electronic systems
" Identify, document, and communicate non conformances, defects, or process deviations
" Support Quality and Engineering during inspections, investigations, and corrective actions
Training, Mentorship & Continuous Improvement:
" Provide technical guidance and on the job training to Level I Composite Operators
" Support onboarding, cross training, and skill development initiatives
" Participate in continuous improvement, lean manufacturing, and process optimization activities
" Assist with prototype builds, rework, and development efforts as required
Safety, Environmental & Housekeeping:
" Comply with all Environmental, Health & Safety (EHS) requirements and Bell program safety standards
" Properly use personal protective equipment (PPE), including respirators and protective clothing
" Maintain a clean, organized, and FOD free work area
" Properly segregate and dispose of composite waste, chemicals, and consumables per company and regulatory requirements
Position Requirements
Education, Training & Experience:
" High School Diploma or GED required
" Two (2) to five (5) years of experience in composite manufacturing or aerospace assembly
" Demonstrated experience performing composite layup, wrap, bond, or trim operations with minimal supervision
" Experience working in a regulated aerospace or defense manufacturing environment preferred
Skills & Abilities:
" Proficient understanding of composite materials and manufacturing processes
" Ability to read and interpret engineering drawings, ply books, and work instructions
" Strong attention to detail and quality ownership
" Good manual dexterity and hand eye coordination
" Ability to troubleshoot basic process and quality issues
" Effective communication skills and ability to mentor less experienced operators
" Ability to work independently while supporting team objectives
Physical & Work Environment Requirements:
" Ability to stand, bend, kneel, reach, and perform repetitive motions for extended periods
" Ability to lift and carry materials up to 35 50 lbs.
" Manufacturing environment with exposure to composite materials, resins, solvents, and machinery
" PPE required including gloves, safety glasses, respirators, and protective clothing
Confined Space & Limited Access Work Requirements:
" Ability to safely perform work in confined or restricted spaces including aircraft structures, subassemblies, tooling, and enclosed composite components
" Perform composite layup, bonding, trimming, inspection, or assembly tasks while working in limited access areas that may restrict movement, visibility, or positioning
" Ability to work in awkward positions for extended periods, including kneeling, crouching, bending, reaching, or working overhead
" Comply with all confined space awareness entry required training, safety procedures, and signage requirements as defined by site EHS and program standards
" Ability to maintain situational awareness and follow communication protocols while working in enclosed or restricted environments
" Properly use required personal protective equipment (PPE), ventilation equipment, and monitoring devices when working in confined or limited access spaces
" Immediately report unsafe conditions, physical discomfort, or hazards encountered while working in confined spaces to supervision
Equal Opportunity Statement
Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, age, color, religion, sex, national origin, disability, veteran status, or any other characteristic protected by law.
